P2 P3
Manufactured by:
Masimo Corporation
Irvine, CA 92614
USA
Made in USA
Rx Only
U.S.A. Patents 5,482,036; 5,490,505; 5,632,272; 5,685,299;
5,738,644; 5,769,785.
MEDICAL ELECTRICAL EQUIPMENT
UL 2601-1/CAN/CSA C22.2 No. 601.1
80FK
11329H-0900
1
2
3
5 4
Use the Serial Output Connector to connect a serial device, including a serial
printer or PC, to the Radical. The data is provided in standard RS-232C format.
See Section 7, Serial Interface Specifications. All external device connections
to the Serial Output Connector must be IEC-60950 compliant.
Use the Analog Output Connector to interface with an analog output device,
such as a chart recorder or nurse call system. All external device connections
to the Analog Output / Nurse Call Connector must be IEC-60950 compliant.
Use the SatShare Cable Connector to connect a SatShare cable to the SpO
2
input connector of a multiparameter patient monitor. All external device
connections to the SatShare Cable Connector must be IEC-60101-1-1
compliant. SatShare cables are available to interface with most major
multiparameter patient monitors. Check the label on the SatShare cable and the
SatShare Directions for Use to ensure that the correct cable is used for each
type of patient monitor. Refer to the Masimo web site at www.masimo.com for the
latest SatShare cables and validated instruments.
The power entry module contains the input connector for AC power, an on/off
switch and two fuses. The AC input and the on/off switch provide power to the
system from the AC line. Always connect the pulse oximeter to the mains power
for continuous operation and/or battery recharging.
NOTE: Some power entry modules may not have the on/off switch.
Use the Equipotential Ground Connector for grounding.
P1 Serial Output
Connector
P2 Analog Output /
Nurse Call
Connector
P3 SatShare Cable
Connector
Power Entry
Module
Equipotential
Ground
Connector
1
2
3
4
5
Commenti su questo manuale