Masimo Radical Signal Extraction Manuale dell'Operatore Scaricare il pdf (Pagina 62)

4-22 Radical-7 Signal Extraction Pulse CO-Oximeter Operator’s Manual

MENU ITEMS DESCRIPTION

INTERFACE

ALARMS

SpO

/BPM

During SatShare, Patient SafetyNet, Philips Vuelink, Spacelabs Flexport

and RadNet operation, the audible alarms for SpO

can be enabled or

disabled by selecting Yes or No.

All other parameters/measurements will be actively monitored by the instrument.

The Rainbow parameters/measurements cannot be turned off with this

feature.

Yes setting: allows SpO

and pulse rate audible alarms at the

Radical-7 and the interfaced system.

No setting: mutes the SpO

and pulse rate audible alarms at the

Radical-7 while allowing SpO

and pulse rate audible

alarm alerts at the interfaced system. The “No” setting

prevents both systems (Radical-7 and interfaced system)

from producing audible alarms at the same time.

NOTE: The Radical-7 reverts to Interface Alarm SpO

/BPM “Yes” during

power interruptions or when the SatShare connection is lost or the

instrument becomes separated from the docking station. This ensures that

the Radical-7 provides audible alarms for SpO

and pulse rate when the

connection to the interfaced system becomes compromised.

SATSHARE

NUMBERS

During SatShare operation the saturation and pulse rate measurements can be

displayed on the Radical-7 by selecting a SatShare Numbers setting of Yes.

POWER SAVE

Select Yes to maximize battery-operating time of the Radical-7 while

Selecting Yes will disable Docking Station functions such as SatShare,

Serial and Analog output. Selecting No will activate these Docking

Station functions while operating on battery power. (While operating in

the Power Save mode, a power cycle of the Radical-7 may be required to

activate the Docking Station again after it has been disabled.)

NOTE: Handheld devices with software version 7.6 or greater will

automatically activate the power save mode when the handheld device

is docked into a docking station that is not connected to AC power.

SMART TONE

Select Yes to activate the SmartTone function. This will allow the audible

pulse to continue to beep when the pleth graph shows signs of motion.

Select NO to turn off SmartTone.

PVI

Select Yes to display the PVI measurement. The PVI will display

numerically on the main screen and also will allow to the user to change

the maximum and minimum PVI settings in the Trend Setup menu.

Select NO to deselect the measurement.

SpHb AVERAGING

SpHb Averaging can be set to Long, Medium, or Short.

PI AVERAGING

The signal averaging algorithm can be set to short or long. The default

is short.

Operation

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 115 116

Commenti su questo manuale

Nessun commento

Masimo Radical Signal Extraction Manuale dell'Operatore Pagina 62

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Masimo Radical Signal Extraction