Masimo Radical Signal Extraction Manuale dell'Operatore Pagina 78

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 77
5-2 Radical-7 Signal Extraction Pulse CO-Oximeter Operator’s Manual
5
Alarms and Messages
System Messages
The following chart alphabetically lists all system messages displayed on the LCD screen. The
cause of the message, and the action(s) to be taken are also shown.
The operator should become thoroughly familiar with this information before using the Pulse
CO-Oximeter for patient monitoring.
MESSAGE POSSIBLE CAUSE(S) RECOMMENDATION
REPLACE
SENSOR
SpHb reusable sensor has used all
its available monitoring time.
Sensor is non-functional.
Replace sensor.
DEFECTIVE
CABLE
Pulse CO-Oximeter cannot identify
the connected cable or the cable
has failed.
Inoperative or faulty cable; Replace
cable. Refer to the Directions for Use
of the cable being used.
REPLACE
SENSOR
Defective sensor. Replace sensor.
INCOMPATIBLE
SENSOR
Not a proper Masimo sensor.
Replace with a proper Masimo
sensor. Refer to Section 8.
SpHb sensor is attached to a
instrument without SpHb installed.
Use a non-SpHb sensor.
Contact your local Masimo
Representative to learn more about
the optional SpHb upgrade.
INVALID
SENSOR
Not a compatible Masimo sensor.
Replace with a proper Masimo
sensor. Refer to Section 8.
SpHb sensor is attached to a
instrument without SpHb installed.
Use a non-SpHb sensor.
Contact your local Masimo
Representative to learn more about
the optional SpHb upgrade.
NO
ADHESIVE
When a single patient use sensor
is used, the adhesive portion of the
sensor is not connected. (Applies to
Rainbow ReSposable CO-Oximeter
Sensor Systems, or ReSposable
Pulse CO-Oximeter Sensor Systems
only.)
Ensure the adhesive portion is
rmly connected to the sensor.
INVALID
ADHESIVE
When a single patient use sensor
is used, the adhesive portion of the
sensor is incompatible or unrecog-
nized. (Applies to Rainbow ReSpos-
able CO-Oximeter Sensor Systems,
or ReSposable Pulse CO-Oximeter
Sensor Systems only.)
Connect the correct adhesive por-
tion of the sensor.
Vedere la pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 115 116

Commenti su questo manuale

Nessun commento