Masimo Radical Signal Extraction Manuale dell'Operatore Scaricare il pdf (Pagina 72)

4-32 Radical-7 Signal Extraction Pulse CO-Oximeter Operator’s Manual

6. Name the file.

7. Save the file to the appropriate folder. Radical-7 trend information will consist of Date,

Time, SpO2, Pulse Rate and Perfusion Index. Trend information will include Pleth Variability

Index, SpCO, SpMet and/or SpHb, if the parameters are installed.

D) Disconnecting the Cable

1. Disconnect the USB-Serial or Serial-Serial cable from the instrument and PC. (See the

specific cable's Directions for Use for instructions on attaching the patient cable to the

instrument.)

ERASING TREND MEMORY

1. Ensure that the Radical-7 is in the Traditional User Interface.

2. Press

to access the trend menu.

3. Press

to enter the Trend menu.

4. Press

two (2) times to access the "Clear Trend" button.

5. Press

to delete Radical-7 trend data.

The Radical-7 continuously trends data. When performing a new study and gathering data on a

new patient, it is highly recommended the "clear function" be utilized in order for the results to be

separate. Turning the Radical-7 off will not erase the trend data.

TREND DATA FORMAT

After a successful download of the trend data, a .out file will be created containing the trend-dump

information in ASCII delimited format. The format is defined in the following table.

PARAMETER SPECIFICATION

Date

MM\DD\YY

Time

HH:MM:SS

Installed Parameter/

Measurement

Numeric value (see the display ranges in the Factory and User Configurable

Default Settings table located at the beginning of this section)

Exception

Messages

The exceptions are displayed as a 3 digit, ASCII encoded, hexadecimal

value. The binary bits of the hexadecimal value are encoded as follows:

000 = Normal operation; no exceptions

001 = No Sensor

002 = Defective Sensor

004 = Low Perfusion

008 = Pulse Search

010 = Interference

020 = Sensor Off

040 = Ambient Light

080 = Unrecognized Sensor

100 = reserved

200 = reserved

400 = Low Signal IQ

800 =

Masimo SET. This flag means the algorithm is running in full SET mode. It requires

a SET sensor and needs to acquire some clean data for this flag to be set

Operation

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 115 116

Commenti su questo manuale

Nessun commento

Masimo Radical Signal Extraction Manuale dell'Operatore Pagina 72

Commenti su questo manuale

Prodotti e manuali riguardandi Misurazione, test & controllo Masimo Radical Signal Extraction